How to Not Drive In the Snow

Thursday, September 3, 2009

How to Not Drive In the Snow

Picture (Device Independent Bitmap)

Knowing What Not to Do when Driving in Snow Can Save your Life and Other's!

So it is snowing outside and you may be one of the unlucky one's who have to go to work. Amazingly, living in Virginia would make people think that we have some idea of how to properly drive in such weather. The truth is that people are terrible drivers and literally freak out when there is 1 millimeter of snow on the ground. Here is common sense advice on how NOT to drive in snow and rain.

Difficulty: Easy

Instructions

Things You'll Need:

·       Common Sense

·       Car that has been winterized such as defrosting fluid, heating filter, and good tires.

·       Not your work clothes initially.

·       Ice scraper and gloves.

1.      Step 1

    Picture (Device Independent Bitmap)

    Please remove snow from all windows and the especially the top of your car!

    The first is to not clean your car properly. That means that you will leave snow everywhere and just scrape a little circle on the driver's side so you can see just right in front of you. Do not clean the whole window including the back windows and side mirrors. Best of all though leave all the snow on top of your car so that when you are driving, large amounts of packed snow can fall on other cars and possibly cause them to wreck.

2.      Step 2

    Picture (Device Independent Bitmap)

    Use caution. Drive slower and do not speed. Speeding will cause you to hit the breaks which can make you slide very easily!

    The next thing you want to do in order to cause an accident is to hit the break lots of times and really hard. Don't tap the breaks lightly or try to avoid hitting them at all which is what safe drivers do, you want to make sure to skid past the red light and run into the car in front of you. In addition, go really fast and fly into a ditch.

3.      Step 3

    Picture (Device Independent Bitmap)

    An SUV does not protect you against bad weather, it will just help you in certain circumstances!

    Remember that you own an SUV; therefore, you are KING OF THE ROAD and nothing can stop you. Go ahead and speed, making sure to change lots of lanes which increases your chance of an accident much more likely. Follow other cars very closely and drive aggressively. Hey, it's not your fault other cars did not get anti-lock breaks or 4WD!

4.      Step 4

    Picture (Device Independent Bitmap)

    This is a serrious matter so please excuse the humor; however, if you focus on what not to do, increase of getting where you need to go!

    If you follow these DO NOT's in bad weather, I can almost guarantee that you will increase your chances of possibly killing yourself and other's.

Please do not print this email unless it is absolutely necessary.

The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.

www.wipro.com

READ MORE - How to Not Drive In the Snow

How to Detail Your Car On A Budget

How to Detail Your Car On A Budget

Picture (Device Independent Bitmap)

Detail Your Car On A Budget

How many times do we get into our car and think "this is disgusting, I really need to go have this cleaned". But just don't want to shell out the $125+ dollars it costs now to have it done for you. Well here's a simple and economical way to detail your vehicle yourself for only a couple dollars.

Difficulty: Moderate

Instructions

Things You'll Need:

·       bucket

·       dish soap

·       2 cans foaming carpet cleaner from Dollar Store or the Walmart brand

·       hose

·       rags/towels

·       scrub brush

·       vinegar

·       armor all

·       shop vac or other cleaner that is able to suck water

·       car wax

1.      Step 1

    Picture (Device Independent Bitmap)

    The very first thing you'll need to do is make sure you have all the supplies you need to clean the vehicle. My husband likes to use the foaming carpet cleaner from the dollar store, but if you're like me you can use a more natural cleaner as well. You can mix a cup of vinegar in with your water and add 1/2 cup of borax with it and that cleans really well too. Or melt down in 1 gallon of boiling water 1/3 cup of Fels Naptha soap and add that to another gallon of water to get the carpets really clean too. Another great cleaner for vehicles to get it shiny inside is Armor All which is optional but gives it the extra nice look.

2.      Step 2

    Picture (Device Independent Bitmap)

    Next you will need to take your bucket and fill it up with lukewarm water and add a splash of dish soap to it. Then take a rag and wash the whole car thoroughly opening the door jams to clean those out as well. Rinse off with hose, and wipe down with a clean towel.

3.      Step 3

    Picture (Device Independent Bitmap)

    Now you are ready to tackle the inside. Right now is the time you need to sort through any garbage that is left in the vehicle that needs to be discarded or put aside. Toss out any wrappers, coffee cups, old papers, any food laying around from going through the drive-through, clothes that don't belong in there, etc.
    You have the idea!

4.      Step 4

    Picture (Device Independent Bitmap)

    The fourth thing you want to do is vacuum thoroughly using either a Shop Vac or if you don't own a Shop Vac, your household vacuum should do fine as long as it has a strong suction. Making sure to get into all the crevices as well as under all the seats.

5.      Step 5

    Picture (Device Independent Bitmap)

    Now it's time to wash the carpets. If you are using the foaming carpet cleaner spray down generously over carpets and seats. For the really bad stains spray another coat. If you are using the borax blend or Fels Naptha now is the time to scrub that in too. Let it set for 20 minutes. Get a lukewarm bucket of water and scrub carpet with damp towel. Repeat step on hard stains.

6.      Step 6

    Picture (Device Independent Bitmap)

    Now take a dry towel and rub into carpet to dry. Then take Shop Vac and suck any excess water or lint that is left over. If you don't own a Shop Vac you may need to either borrow one, or worst case scenario you may need to rent one. Either way we are still coming out ahead. Repeat steps with clean towels to ensure you have gotten all the dirt out.

7.      Step 7

    Picture (Device Independent Bitmap)

    Next you will take a wet towel and wipe all vinyl surfaces, dashboard, door panels, back of seats, center console(if you have one),etc. Using a cleaner of your choice to lift soiled areas. Dry with towel.

8.      Step 8

    Picture (Device Independent Bitmap)

    The next step would be to wipe all vinyl surface with the Armor All. Spray on towel and wipe down really well. Again this is optional but it really does leave it looking awesome!

9.      Step 9

    Picture (Device Independent Bitmap)

    Now that your all done cleaning the inside it's time to clean the windows inside and out. My cleaner of choice for the windows is part vinegar and water, wiping really good with just an old rag. Don't use paper towels it tends to leave a lot of lint.

10.     Step 10

    Picture (Device Independent Bitmap)

    The last step to detailing your vehicle is to wax the outside of the car. Follow the directions on your choice of wax, using 1 coat should do.

11.     Step 11

    Picture (Device Independent Bitmap)

    Now go take your family out to dinner with the money you just saved! Whoo hoo! You'll be a big hero!

Please do not print this email unless it is absolutely necessary.

The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.

www.wipro.com

READ MORE - How to Detail Your Car On A Budget

How to Save A Lot of Money on Gas

How to Save A Lot of Money on Gas

Picture (Device Independent Bitmap)

FOR A CLEANER ENVIRONMENT

This article will show you how to clean your vehicle's fuel injectors quickly.

You'll save money by getting a lot better gas mileage. If you are told you need to replace a fuel injector, try this first and it could very well save you hundreds of dollars on parts and labor to replace a fuel injector.

Difficulty: Easy

Instructions

Things You'll Need:

·       3 to 5 Cans of Carburetor Cleaner

·       1 Bottle of Rubbing Alcohol or Fuel Injector Cleaner

·       1 Flat Head Screwdriver

1.      Step 1

    With fuel prices what they are today we need all the help we can get.

    Rubbing alcohol costs less than fuel injector cleaner and that is why I use it. It's up to you which one you choose for quality as it is six of one, half a dozen of the other.

    Pour the contents of the bottle in your gas tank before filling up at the pump.

2.      Step 2

    Return home and open the hood of your vehicle. Locate the air filter. The air filter housing has a hose that leads to the throttle plate. Remove air filter housing and accompanying hose with a flat head screwdriver. This step should take less than 60 seconds.

3.      Step 3

    Start your engine.

4.      Step 4

    Spray carburetor cleaner directly into the hole where the air cleaner housing hose was hooked up to the engine.

    Once you start spraying the carburetor cleaner you will immediately notice your car running smoother and quieter.

5.      Step 5

    Allow your vehicle to idle. If the engine begins to run rough again spray another can of carburetor cleaner.

    Repeat until you've used three cans if your vehicle is less than five years old. Five cans will be required if your vehicle is more than five years old.

6.      Step 6

    If your engine is still running rough contact a mechanic.

Please do not print this email unless it is absolutely necessary.

The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.

www.wipro.com

READ MORE - How to Save A Lot of Money on Gas

How to Stop Waiting For Your Mechanic To Fix Your Car Or Auto

How to Stop Waiting For Your Mechanic To Fix Your Car Or Auto

Here are few suggestions for you if you have been waiting for your car to be repaired with no results.

Difficulty: Moderately Easy

Instructions

1.      Step 1

    If you dropped off your car for repairs, has it been a while since you heard from them?
    When you call the company do they give you a date that the car will be ready and then when you call the car isn't ready?
    Does the company tell you that they are having trouble finding parts?
    Does to company tell you that they are short on help?
    Do you feel like you have to nag or "nice" the work out of them? In other words, if you begin to get a little annoyed, then do they tell you that you can take your work elsewhere?

2.      Step 2

    If you answered yes to many, all or even one of the questions above then you probably have a mechanic company that takes major repairs on big vehicles first because they mean more money and they put off other peoples car repairs if they are small or they can't charge as much for the repair. So you are stuck in the middle especially if you had to have your smaller car towed or the repair is more minor and the car is not working.

3.      Step 3

    The best thing to do in this case is be as nice as possible, but be extremely persistent. When you call ask if your car is fixed yet. Make it the first question. When the company tells you that it is not, then ask what day it will be repaired. Get as specific an answer as possible. Like Tuesday at 2pm. Then tell the company that you will call then to see if it is ready. Make it a point to call at that time and on that date.

4.      Step 4

    If the company tells you that the auto is not ready then, as nicely as possible, get another time and date that it will be, and then go to the shop and actually pick up your car. Tell the company that you are there to pick the car up. If it is not fixed, then get another date. Keep embarrassing them and aggravating them with your nice attitude.

5.      Step 5

    When you finally get your car and pay for it, then file a complaint with the better business bureau. In the letter describe what you think happened with the company who fixed your car. A lot of people refer to the BBB when they are shopping for a local business. This will help them be aware of the company's business practices.

Please do not print this email unless it is absolutely necessary.

The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.

www.wipro.com

READ MORE - How to Stop Waiting For Your Mechanic To Fix Your Car Or Auto

How to Tint Glass Automobile Windows

How to Tint Glass Automobile Windows

Check with your state laws first before attempting this project. Some states may have restrictions on tinted windows. It’s advisable to purchase a kit that comes with the necessary tools and the film is already cut to the correct size for your car. The tools in “Thins You’ll Need”, with the exception of the heat gun, distilled water, baby shampoo, and spray bottle should be included with the kit. The rear window kit may have to be purchased separately and does not have to be from the same manufacture.

Difficulty: Moderately Easy

Instructions

Things You'll Need:

·       Plastic scraper

·       Hard Card

·       Gasket Jammer

·       Mild shampoo (baby shampoo)

·       Spray Bottle

·       Distilled Water

·       Heat gun (rear window)

1.      Step 1

    Mix ¼ tsp of baby shampoo with 1 quart of distilled water.

2.      Step 2

    Clean outside and inside of window with cleaning solution and wipe dry with a lint free cloth or paper towels.

3.      Step 3

    Using the plastic scraper, scrap off any dirt that has remained on the window.

4.      Step 4

    Remove weather gasket from window.

5.      Step 5

    Wet inside of window using distilled water; remove film from liner and wet sticky side of liner. Roll down window slightly and apply film to inside of window. Tuck film under bottom gasket using the gasket jammer. Align top of film to the top of the window and make sure sides are also aligned.

6.      Step 6

    Using the hard card, squeegee from the center out; be sure to remove all bubbles.

7.      Step 7

    Roll down window and re-insert weather gasket. When done roll window back up.

8.      Step 8

    Repeat steps 2 through 7 for remaining side windows. Allow 2-3 days before rolling down windows.

9.      Step 9

    Clean outside of rear window with soapy water. Use the plastic scraper scrape off any dirt that has remained on the window.

10.     Step 10

    The rear window film is heat shrinkable and you must follow the manufactures’ instructions as the installation may vary by manufacture. The basic concept applies that applied for the side windows except for the rear window you will shrink the film to size.

Please do not print this email unless it is absolutely necessary.

The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.

www.wipro.com

READ MORE - How to Tint Glass Automobile Windows

 
 
 

Popular Posts